Gaggenau gaggenau refigerator rc 462/413 rf 411/413 rf 461/463 rf 471 rw 414/464 Benutzerhandbuch

Notes:
–

One screw should be screwed in under the threaded 

rod in each case.

–

The adjusting rib has a various holes for different 

furniture door design variations. Always carry out 

screwing jobs on the most stable part of the furniture 

door.

Note:
The fixing ribs are pre-assembled for stainless steel 

doors. In this case continue with the next installation step 

(“C / 9. Mounting the furniture door”).
1. Hang the furniture door on the threaded rod (a).
2. Adjust the furniture door using the threaded rod (Torx 

screwdriver).

Re-examine the dimensions of the crack 

continuously. To do this, use the assembly 

gauge (b).

3. Transfer the position of the fastening screws on the 

outer edge of the appliance door to the furniture door 

and mark.

4. Remove furniture door.

5. On both lengths of the furniture door, draw a parallel 

with the help of the positioning aid.

6. Lengthen the markings to the parallels using an 

angle of contact.

7. Apply the fixing ribs (b) and mark out the holes. 
8. Pre-drill the holes.
9. Screw on the fixing ribs (b).

10. Hang the furniture door on the threaded rods.