Gaggenau gaggenau refigerator rc 462/413 rf 411/413 rf 461/463 rf 471 rw 414/464 Benutzerhandbuch

2. Slide the covering strips on the longitudinal side into 

the gap between the furniture door (a) and the glass 

pane (b).

3. Cut the covering strips of the shortest sides to the 

required length.

4. Push cover strips into the gap between the furniture 

door (a) and glass pane (b).

Depending on the installation situation, it may be 

necessary to adjust the door opening angle. A door 

opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
1. Open door to 90°.
Insert the banking pin through the boreholes which are 

now vertically aligned and drive in with a hammer.