Behringer EUROCOM CL3264 Spezifikationenblatt

3

Summary description: The loudspeaker shall be a professional 3-way fixed-installation loudspeaker system in a steel-braced

plywood enclosure using a bypassable internal crossover network with a 12" / 310 mm low-frequency cone transducer and

waveguide-mounted 6" / 150 mm mid-frequency cone driver and 1.35" / 34 mm high-frequency compression driver.
Drivers: The loudspeaker system shall use three transducers:
•  Low-frequency driver shall be a 12" / 310 mm direct-radiating cone transducer
•  Mid-frequency driver shall be a 6" / 150 mm cone driver mounted in tandem with the high-frequency driver on a rotatable

60º x 40º waveguide constructed of polypropylene

•  High-frequency driver shall be a 1.35" / 34 mm diaphragm compression driver mounted in tandem with the

mid-frequency driver on a rotatable 60º x 40º waveguide constructed of glass-filled ABS -polycarbonate

Enclosure: The loudspeaker system shall be housed in an enclosure constructed of laminated birch plywood that is internally

braced with steel. The enclosure shall be finished with durable, scuff-free black or white paint. The front of the enclosure shall

be protected with a perforated grille of powder-coated structural steel behind fabric-wrapped acoustically transparent foam.

The back of the enclosure shall have a recessed steel input plate for connectors.
Rigging and mounting: The exterior of the enclosure shall be fitted with 23 M10 threaded rigging points. The rear of the

enclosure shall have 4 M8 threaded inserts for OmniMount™ 60 bolts. The enclosure shall provide attachment points for an

optional yoke bracket.
I/O and connectors: The loudspeaker system shall have the following connectors:
•  Two NL4 connectors, wired in parallel as full-range inputs to the passive crossover
•  One 4-position terminal strip with captive wire clamps and removable plastic cover, with IN terminals wired in parallel to

OUT terminals and to the NL4 connectors

•  Crossover bypass as a detachable connector on the crossover PCB, allowing direct connection to each driver
Performance criteria: The loudspeaker system shall meet the following performance criteria:
•  Nominal impedance shall be 8 Ω
•  Sensitivity (1 W / 1 m passive) shall be 96 dB
•  Usable frequency range (-10 dB) shall be 37 Hz - 20 kHz
•  Frequency response (±3 dB) shall be 42 Hz - 18 kHz
•  Power Handling (IEC268-5, passive) shall be 200 W RMS @ 40 V
•  Nominal dispersion shall be 60º x 40º (axis dependent on horn orientation)
•  Maximum SPL (1 m, passive) shall be 119 dB continuous and 125 dB peak
Dimensions and weight: The loudspeaker system shall have the following physical characteristics:
•  Height shall be 31.9" / 811 mm
•  Width shall be 18.5" / 470 mm
•  Depth shall be 16.5" / 418 mm
•  Net Weight shall be no more than 68.9 lbs / 31.3 kg
Model: The loudspeaker shall be the BEHRINGER EUROCOM CL3264/CL3264-WH.