Garmin Edge 1000 Benutzeranleitung

Twist the cover counter-clockwise until the marker points to 

unlocked and the cover is loose enough to remove.

Remove the cover and the battery 

Á

.

Wait 30 seconds.

Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.

Twist the cover clockwise until the marker points to locked.
NOTE: The LED flashes red and green for a few seconds 

after battery replacement. When the LED flashes green and 

then stops flashing, the device is active and ready to send 

data.

If the device stops responding, you may need to reset it. This 

does not erase any of your data or settings.

Hold   for 10 seconds.
The device resets and turns on.

You can restore all of the device settings to the factory default 

values.
NOTE: This deletes all user-entered information, but it does not 

delete your history.

Select   > System > Device Reset > Factory Reset >  .

• Decrease the backlight or shorten the backlight timeout 

).

• Select the Smart recording interval (

• Turn on the Auto Sleep feature (

• Turn off the Bluetooth wireless feature (

).

• Turn off wireless connectivity (

You can use auto sleep to automatically enter sleep mode after 

5 minutes of inactivity. During sleep mode, the screen is turned 

off and the ANT+ sensors, Bluetooth, and GPS are 

disconnected. Wi

‑Fi continues to run while the device is asleep.

From the home screen, select   > Activity Profiles.

Select a profile.

Select Auto Features > Auto Sleep.

• Connect your device to a wireless network.

Satellite information is wirelessly downloaded to your device, 

allowing it to quickly locate satellite signals.

• Pair your device with a Bluetooth enabled smartphone.

Satellite information is sent to your device, allowing it to 

quickly locate satellite signals.

• Take your device outside to an open area away from tall 

buildings and trees.

• Remain stationary for several minutes.

• Go to 

• Go to 

• Go to 

, or contact your Garmin dealer 

for information about optional accessories and replacement 

parts.

The device may display temperature readings that are higher 

than the actual air temperature if the device is placed in direct 

sunlight, held in your hand, or is charging with an external 

battery pack. Also, the device will take some time to adjust to 

significant changes in temperature.

You can view the unit ID, software version, and license 

agreement.

From the home screen, select   > System > About.

Replacement bands (O-rings) are available for the standard 

mount in two sizes:

• 1.3 × 1.5 × 0.9 in. AS568-125
• 1.7 × 1.9 × 0.9 in. AS568-131
NOTE: Use Ethylene Propylene Diene Monomer (EPDM) 

replacement bands only. Go to 

, or 

contact your Garmin dealer.

Before you can update your device software, you must have a 

Garmin Connect account, and you must download the Garmin 

Express application.

Connect the device to your computer using the USB cable.
When new software is available, Garmin Express sends it to 

your device.

Follow the on-screen instructions.

Do not disconnect your device from the computer during the 

update process.
NOTE: If you have already used Garmin Express to set up 

your device with Wi

‑Fi connectivity, Garmin Connect can 

automatically download available software updates to your 

device when it connects using Wi

‑Fi.

Help us better support you by completing our online registration 

today.
• Go to 

.

• Keep the original sales receipt, or a photocopy, in a safe 

place.

Some data fields require ANT+ accessories to display data.
Balance: The current left/right power balance.
Balance - 10s Avg.: The 10-second moving average of the left/

right power balance.

Balance - 30s Avg.: The 30-second moving average of the left/

right power balance.

Balance - 3s Avg.: The three-second moving average of the 

left/right power balance.

Troubleshooting

15