Epson Multi-mode Data Controller MFJ-1278B Benutzerhandbuch
MFJ-1278B MULTI-MODE HARDWARE
NOTE:
*
When JMP23 is shorted, it will RESET the MFJ-1278B. This means that all
parameters will be reset to the default values. This is the same as removing the bbRAM
battery except it is much quicker.
**
battery except it is much quicker.
**
MFJ offers an optional Real-time clock module (MFJ-43) that can be installed on
the MFJ-1278B mother board. This clock keep the MFJ-1278B clock running all the time.
You will not have to reset the clock everytime you turn the MFJ-1278B on.
***
You will not have to reset the clock everytime you turn the MFJ-1278B on.
***
When these jumpers (JMP E, JMP F, JMP G, JMP H) are removed the MFJ-1278B
will operate European RTTY tone when the VB modem is selected. All four jumpers must
be removed to operate European RTTY.
be removed to operate European RTTY.
PARALLEL PRINTER PORT PIN FUNCTION,J12
The MFJ-1278B provides the user with a built-in Parallel Printer Port. The user can use the
built-in printer port to print received text or graphics. The built-in printer port is compatble
with most Epson and IBM parallel printers. Below in Table 8-2 is the pin out of the Parallel
Printer Port, J12:
built-in printer port to print received text or graphics. The built-in printer port is compatble
with most Epson and IBM parallel printers. Below in Table 8-2 is the pin out of the Parallel
Printer Port, J12:
Table 8-2 Parallel Port Pin Out
Printer Port Pin #
Pin Function
1
Strobe
2
Data Bit 1
3
Data Bit 2
4
Data Bit 3
5
Data Bit 4
6
Data Bit 5
7
Data Bit 6
8
Data Bit 7
9
Data Bit 8
10
Acknowledge
11
Busy
12 thru 17
No connection
18 thru 25
Ground