Bush BMS05DABIP Benutzerhandbuch

This function allows you to program the system to switch off after a set period of time.  
1.     To activate the sleep function, repeatedly press the SLEEP Button to select one of the sleep 

times below.

2.    When the display shows your desired sleep time, release the button and the sleep timer will be 

activated. The display will show “     ” with the time selected. 

3.

To cancel the sleep function, repeatedly press the SLEEP Button until the display shows “Sleep 
Off”.

 

Press the EQ Button on the remote control to select different preset EQ modes, the display will show 
in the below. Press the EQ Button repeatedly to select desired mode.

Press the X-BASS Button on the remote control to turn this function on or off. The display will show 
“X-BASS ON” or “X-BASS OFF”. When the X-BASS is on, the bass sound is enhanced. 

Press the MUTE Button on the remote control to turn the sound off completely. The display will flash 
“MUTE” to show the function has been turned on. To cancel mute and restore the sound, press the 
MUTE Button again or the VOLUME +/- Buttons and the “MUTE” will disappear from the display. 
 

Press the BACKLIGHT Button to turn the display backlight on or off. The backlight will automatically 
be off in standby mode.

A 3.5mm stereo headphone input is located on the front panel. Connect a set of stereo headphones 
(not  included)  to  this  input  for  private  listening.  The  external  speakers  will  be  automatically 
disconnected when the headphones are in use.

IMPORTANT:  When  using  headphones  always  set  the  volume  to  a  low  level  before  you  put  the 
headphones on. Then gradually increase the volume to a comfortable listening level.

BMS05DABIP

12