Bühler 25 Series Benutzerhandbuch

                                             

25 Series Rotary Tiller 

14

Buhler Farm King 25 Series Rotary Tillers are designed with the inherent flexibility of 
operating well in almost any kind of soil and terrain conditions.  However, the operator 
has the responsibility of being familiar with all operating and safety procedures and 
following them. 

Each operator should review this section of the manual at the start of the season and as 
often as required to be familiar with the machine.  When using, follow this procedure: 

1.

Review and follow the pre-operation Checklist.  Review Safety Instructions. 

2.

Attach the tractor to the machine.  See Attaching/Unhooking Section. 

3.

Before going to the field review Transporting Section. 

4.

Pull into the field and position the machine in a level area. 

5.

Lower into working position. 

6.

Set the machine: 
a.

Level the frame: 
Use the screw jack on the right lift arm to level the frame from side-to-side. 

b.

Depth:  Use the Depth Gauge Shoes on each side to set the operating 
depth.  Position the Depth Gauge Shoes in the top hole for shallow tilling 
and in the bottom hole for deep tilling. 

ALERT:  In soft soil conditions, the skid plates become less effective and
sink into the ground.  Use the turnbuckle on the top link to set the frame 

angle so the bottom of the Depth Gauge Shoes are level when operating.

Offset:

The Category Pin Brackets can be moved 3 to 4 inches along the Deck 
Assembly to either side of center if required. Center the machine for 
normal operation.  Offset if the tire tracks are wider than the machine or 
when tilling around trees, bushes or other areas. 

c. Drag 

Shield:

Adjust the chain in the Adjustment Bracket to set the height of the Drag 
Shield.  Set the Drag Shield to just contact the tilled soil when operating.