Brother LZ2-B855E Benutzeranleitung
Programmer
129
Chapter 3 Programming with Command Function
Ending program
1.
Press
.
Lines
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
The example in the left is used for explanation of
programming.
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
pattern.
The first stitch (point A) is programmed.
3.
Input the stitch length.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
Input 030 to make the stitch length to 3.0 mm.
4.
Press
.
To change the stitch length, specify the pitch value
before pressing
before pressing
.
5.
Move the work clamp with
. Press
when the needle point is at point B of the
pattern.
pattern.
6.
Repeat steps 4 and 5 and create the program to
point E.
point E.
Inputting the end code
1. Press at the last stitch and press
.
The work clamp returns to the start position.