Brother LZ2-B855E Benutzeranleitung
176
Programmer
Chapter 3 Programming with Command Function
5.
Repeat steps 3 and 4 and move the needle to the end point. Input
.
When the alarm sound is complete, the needle point moves to the end position.
Parallel stitch
Command to be used
Creating parallel stitch in the same direction to the sewing path. Input the
width of parallel stitch in
width of parallel stitch in
.
Values 1.0 - 9.9 mm are available for the width.
Example
Width
Input
1.5 mm
315
Input the stitch length in
.
Carrying out parallel stitch on the left side to the sewing path.
Carrying out parallel stitch on the right side to the sewing path.
Starting parallel stitch calculations.
(This is the end code. Refer to page 181 for details.)
(This is the end code. Refer to page 181 for details.)
1.
Select the sewing start position with
and press
.
2.
Determine the width and input
.
3.
Move the needle with
to select the second point, then press
.