Brother QL-1060N Benutzerhandbuch

Configuring your network printer

a

Type 

http://printer_ip_address/

 into your browser. (Where 

printer_ip_address

 is the IP 

address or the print server name)

„

For example:

http://192.168.1.2/ (if the printer’s IP address is 192.168.1.2.)

If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter 
the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter 
the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The 
NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as 
“BRNxxxxxxxxxxxx” where “

xxxxxxxxxxxx

” is the Ethernet address.

 

b

Click Network Configuration.

c

Enter a user name and a password. The User Name is 

admin

 and the default Password is 

access

.

d

Click OK.

e

You can now change the print server settings.

Node name: Node name appears in the Printer Settings Page. The default Node name of the network card 
in the printer is “BRNxxxxxxxxxxxx” where “xxxxxxxxxxxx” is the Ethernet address.

 

The Printer Settings Page prints a report listing the network settings. You can print the Printer Settings Page 
using the cut button of the printer.

a

Make sure that the DK roll is set and the front cover is closed.
To print the Printer Settings Page, we recommend to use 4” (102mm) DK roll.

b

Turn on the printer.

c

Press and hold the Cut button.

• To reset network setting and turn APIPA ON 

Turn off the printer. Keep pressing ON/OFF button and press CUT button twice. All the network setting 
will be reset. Wait for two seconds after pressing ON/OFF button and press CUT button.

• To reset network setting and turn APIPA OFF

Turn off the printer. Keep pressing ON/OFF button and press CUT button four times. All the network 
setting will be reset. Wait for two seconds after pressing ON/OFF button and press CUT button.