Brother PT-65 Benutzeranleitung

The Add-in feature icon is not

displayed on Microsoft

Word.

• Is Microsoft

Word started up from Microsoft

Outlook

• Is Microsoft

Word chosen for the editor usually used for

Microsoft

Outlook

Due to the limitation of the program, the Add-in feature of

Microsoft

Word is unable to be used with the above settings.

Quit Microsoft

Outlook

, and restart Microsoft

Word.

Cutter error

• If the cutter error occurs, keep the DK roll compartment cover

closed and press ON/OFF button. The cutter moves back to the

normal position and turns the machine OFF automatically. After

the machine is OFF, inspect the cutter unit and remove the

paper jam.

The printed bar code cannot be

read.

• Set the label vertical to the print head as shown below.

• Some types of scanner are not able to read the bar code. Try

using another scanner.

• We recommend printing the Bar code with Print Quality options

set to "Give priority to print quality".

Windows

XP:

To change the Print Quality options, open the printer properties

from [Control Panel]-[Printer and other hardware]-[Printer and

Faxes], right-clicking the printer whose settings are to be

changed, then selecting [Properties]. Then, in the [General] tab,

click [Printing Preferences...].

Windows Vista

To change the Print Quality options, open the printer properties

by going to [Control Panel]-[Hardware and Sound]-[Printers],

right-clicking the printer whose settings are to be changed, then

selecting [Properties]. Then, in the [General] tab, click [Printing

Preferences...].

Windows

To change the Print Quality options, open the printer properties
by going to

-[Devices and Printers], right-clicking the printer

whose settings are to be changed, and selecting [Printer

properties]. Then, in the [General] tab, click [Preferences...].

I want to reset the printer/delete

the data transferred from PC.

(QL-1060N only)

• To reset the machine, press and hold the ON/OFF button to

switch the machine OFF. Then, hold down the ON/OFF button

for two seconds. Continue holding down the ON/OFF button,

and press the CUT button six times. The machine will then

reset. All the transferred data from the PC will be deleted and

the machine will be reset to factory setting.

I want to cancel the current

printing job. (QL-1060N only)

• Make sure that the printer is ON, and press ON/OFF button.

Problem

Solution

Label exit slot

Recommended
print direction

Print head