West Elm Flat Stock Flush Mount Montageanweisungen
Important Safety Instructions:
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling fixture.
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling fixture.
•We strongly recommend that a professional electrician install all direct wire fixtures.
·This fixture has been rated for up to 2 x 60-watt maximum TYPE A standard bulbs (not included). To
avoid the risk of fire, do not exceed the recommended wattage.
·This fixture has been rated for up to 2 x 60-watt maximum TYPE A standard bulbs (not included). To
avoid the risk of fire, do not exceed the recommended wattage.
assembly instructions
flat stock flush mount
9779026- 07/07
page 1 of 2
Parts Enclosed:
• (1) Mounting plate (G)
• (1) Screw Cap (E)
• (1) Canopy (H)
• (4) Metal Screws (D)
• (1) Shade Canopy (J)
• (1) Shade (I)
• (1) Mounting plate (G)
• (1) Screw Cap (E)
• (1) Canopy (H)
• (4) Metal Screws (D)
• (1) Shade Canopy (J)
• (1) Shade (I)
Hardware Included:
• (2) Mounting screws (C)
• (1) Green ground screw (B)
• (3) Plastic wire connectors (A)
• (2) Mounting screws (C)
• (1) Green ground screw (B)
• (3) Plastic wire connectors (A)
To install you will need:
• Electrical tape
• Screwdriver
• Electrical tape
• Screwdriver
I
H
G
C
D
A
B
E
J
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off lamp and allow it to
cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
·To reduce the risk of fire, electrical shock or personal injury, always turn off lamp and allow it to
cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
·For your safety and convenience, assembly by two people is recommended
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
·For your safety and convenience, assembly by two people is recommended
Assembly Instructions:
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
2. Carefully unpack all fixture parts and hardware and lay out on a clear workspace.
3. Carefully inspect the fixture wires. The NEUTRAL FIXTURE WIRE is white. The HOT FIXTURE WIRE is black.
The yellow-green wire or bare wire is the GROUND WIRE.
4. Attach the GROUND WIRE from the fixture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE,
be sure to insert the green ground screw (B) into the mounting plate (C), and wrap the fixture's bare ground wire
around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME BE PROPERLY
GROUNDED.
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
2. Carefully unpack all fixture parts and hardware and lay out on a clear workspace.
3. Carefully inspect the fixture wires. The NEUTRAL FIXTURE WIRE is white. The HOT FIXTURE WIRE is black.
The yellow-green wire or bare wire is the GROUND WIRE.
4. Attach the GROUND WIRE from the fixture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE,
be sure to insert the green ground screw (B) into the mounting plate (C), and wrap the fixture's bare ground wire
around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME BE PROPERLY
GROUNDED.