West Elm Flat Stock brackets Montageanweisungen
mounting instructions
: bracket flat stock s/2
9180522/9180530/9180548/9180498/9180506/9180514 - 12/08
page 1 of 1
A
NOTE:
• For your safety, installation by two people is recommended.
• STUD MOUNTING REQUIRED. LOAD CAPACITY IS 50 LBS.
• Wipe with a soft, dry cloth. To protect the finish, avoid
the use of all chemicals and household cleaners.
• For your safety, installation by two people is recommended.
• STUD MOUNTING REQUIRED. LOAD CAPACITY IS 50 LBS.
• Wipe with a soft, dry cloth. To protect the finish, avoid
the use of all chemicals and household cleaners.
screw 8x
A
1. Use a stud finder to locate the studs in your wall and mark these locations in the desired mounting area of the wall.
Use a carpenter’s level to insure the shelf will be level. Hold the brackets at desired locations and mark through the holes
with a pencil onto the wall. Be sure that all screws will go into a stud.
2. Insert screws (A) through the bracket holes directly into studs.
3. Place wood shelf on brackets.