Wells-Gardner D9410 Series Benutzerhandbuch
Wells-Gardner Electronics Corporation
Picture Tube.
• Size: 27V Regular and Flat size to customer requirement
• Dot Pitch: .83mm
Signal Input.
• Video Input: Analog, Positive Signal 4 / 2.2Volts CGA (0.7V p-p)VGA
• Horizontal Sync: TTL Level, Positive or Negative Pulse
• Horizontal Sync: TTL Level, Positive or Negative Pulse
• Scanning : 15.75 KHz-50KHz
• Vertical Input: TTL Level, Positive or Negative pulse
• Scanning : 40-100Hz
• Scanning : 40-100Hz
Power Supply.
• Power Input : 90-240 VAC, 50/60Hz
• Fuse Rating: 250V, 3.15A
• Power Consumption
• Power Consumption
Normal : less than 150W
OSD (On Screen Display) Control:
Operating Temperature: 0
°C - 55°C
Operating Humidity: 10% - 90% (Noncondensing)
Net Weight : 17kg (37lbs) Standard frame
TECHNICAL FEATURES:
Microprocessor control with OSD (On screen display menu).
Microprocessor recognizes the input computer signal and signal output from the
customer control board connected to the main board by a flat cable.
Microprocessor recognizes the input computer signal and signal output from the
customer control board connected to the main board by a flat cable.
Universal AC Input Voltage.
Power supply operates on 90-240 VAC at 60/50Hz for use all over the world.
A (NO SIGNAL IN) message is displayed on the screen if no signal is present
at the signal-input cable while the monitor is powered on.
Control panel.
If you require different display characteristics other than the factory mode presets
of size, position, color settings, use the control panel to program it to your
requirements in each resolution mode. These adjusted settings are kept in memory
even if you change resolution mode or turn off the monitor.
of size, position, color settings, use the control panel to program it to your
requirements in each resolution mode. These adjusted settings are kept in memory
even if you change resolution mode or turn off the monitor.