Bosch Appliances Digital Camera MIC412 Benutzerhandbuch
MIC412TI and MIC412TF Camera | Installation and Operation Manual
AAA
EN | 5
Bosch Security Systems
Issue 8
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions
2.
Keep these instructions
3.
Heed all warnings
4.
Follow all instructions
5.
Install according to manufacturer’s instructions
6.
Do not install near any strong heat sources such as furnaces
7.
Do not open the camera unit, doing so invalidates the unit’s warranty
8.
Do not back-drive the pan or tilt axis of the camera. To do so will damage
the motor drive gear chain and will invalidate the warranty
the motor drive gear chain and will invalidate the warranty
9.
Do not use caustic or abrasive cleaning products on the unit
10.
Do not point the MIC412 camera at the sun. Bosch Security Systems Ltd
will not be liable for any damages to cameras which have been directly
pointed at the sun
will not be liable for any damages to cameras which have been directly
pointed at the sun
11.
In situations where there could be a risk of injury should any part of the
assembly become detached for any reason and fall, normal common
sense safety precautions should be employed; a strong safety chain
between the camera pan shaft and the mounting surface is recommended
assembly become detached for any reason and fall, normal common
sense safety precautions should be employed; a strong safety chain
between the camera pan shaft and the mounting surface is recommended
12.
For transportation please rotate the ball so the window points towards the
base, this helps to protect the wiper & windows during transit
base, this helps to protect the wiper & windows during transit
13.
Ensure that the product case is properly earthed. If the product is likely to
be struck by lightning, ensure that earth-bonding connections are made
correctly to the mounting base of the unit
be struck by lightning, ensure that earth-bonding connections are made
correctly to the mounting base of the unit
14.
Use only the power sources indicated in this user guide and ensure that
the current rating of the supply cable is adequate for the product
the current rating of the supply cable is adequate for the product
15.
Do not stand canted (45°) MIC412’s upright as they can be easily knocked
over, lay them on their side.
over, lay them on their side.