Whirlpool SF379LEK Benutzerhandbuch
9
ELECTRONIC OVEN CONTROL
Display
When power is first supplied to the appliance, “PF” will appear on
the display. Press OFF to clear.
the display. Press OFF to clear.
Any other time “PF” appears, a power failure has occurred. Press
OFF and reset the Clock if needed.
OFF and reset the Clock if needed.
When the oven is not in use, the display shows the time of day.
When using COOK TIME (on some models,) the display will show
either hours and minutes, or minutes and seconds.
either hours and minutes, or minutes and seconds.
Start/Enter
The START/ENTER pad begins any oven function except the
Timer. If not pressed within 5 seconds after pressing a function
pad, the “START?” indicator light will flash as a reminder. On
some models, “START?” will appear on the display.
Timer. If not pressed within 5 seconds after pressing a function
pad, the “START?” indicator light will flash as a reminder. On
some models, “START?” will appear on the display.
If not pressed within 4 to 5 minutes (depending on your model)
after pressing a function pad, the oven display will return to the
time of day mode and the programmed function will be
cancelled.
after pressing a function pad, the oven display will return to the
time of day mode and the programmed function will be
cancelled.
Off/Cancel
The OFF pad stops any function except the Clock, Timer and
Control Lock.
Control Lock.
Clock
On some models, if you do not want the clock time to be
displayed, press and hold the CLOCK pad (button) for 5 seconds.
When the clock is not displayed, you can see the time for 5
seconds by pressing the CLOCK pad (button).
displayed, press and hold the CLOCK pad (button) for 5 seconds.
When the clock is not displayed, you can see the time for 5
seconds by pressing the CLOCK pad (button).
To Set:
Before setting, make sure the oven, TIMER and COOK TIME are
off.
off.
1. Press CLOCK.
2. Press the HR or MIN “up” or “down” arrow pads (buttons) to
set the time of day.
3. Press CLOCK or START.
Timer
The Timer can be set in hours or minutes up to 12 hours and 59
minutes, and counts down the set time. The Timer does not start
or stop the oven.
minutes, and counts down the set time. The Timer does not start
or stop the oven.
To Set:
1. Press TIMER SET.
If no action is taken after one minute, the display will return to
the time of day mode.
the time of day mode.
2. Press the HR or MIN “up” or “down” arrow pads (buttons) to
set the length of time.
3. Press START.
If not pressed within 5 seconds, the display will return to the
time of day mode and the programmed function will be
cancelled.
time of day mode and the programmed function will be
cancelled.
When the set time ends, end-of-cycle tones will sound, then,
if on, reminder tones will sound every minute.
if on, reminder tones will sound every minute.
4. Press TIMER OFF anytime to cancel the Timer.
Remember, do not press the OFF pad (button) because the
oven will turn off.
oven will turn off.
To display the time of day when the timer is counting down, press
CLOCK.
CLOCK.
Control Lock
The Control Lock shuts down the control panel pads to prevent
unintended use of the oven.
unintended use of the oven.
When the control is locked, only the CLOCK and TIMER pads will
function.
function.
To Lock/Unlock Control: Before locking, make sure the oven
and Timer are off. Press and hold START/ENTER for 5 seconds. A
single tone will sound, “LOC” and “LOCK’D” (on some models)
will appear on the display. “LOC” will also appear whenever any
command pad is pressed while the control is locked.
and Timer are off. Press and hold START/ENTER for 5 seconds. A
single tone will sound, “LOC” and “LOCK’D” (on some models)
will appear on the display. “LOC” will also appear whenever any
command pad is pressed while the control is locked.
Repeat to unlock. “LOC” and “LOCK’D” (on some models) will
disappear from the display.
disappear from the display.
1. Oven Settings
2. Temperature
3. Display
4. Clock
5. Timer
6. Oven Light
7. Hour
8. Minute
9. Start/Enter (Control Lock)
10. Off/Cancel
1
3
10
9
8
7
6
2
5
4