Whirlpool RF3020XG Benutzerhandbuch

CARING FOR YOUR RANGE

R

EMOVING

 

THE

 

OVEN

 

DOOR

For normal use of your range, you do not need to
remove the door. However, if you find it necessary
to remove the door, follow the instructions in this
section.

NOTE: The oven door is heavy.

1.  Use a putty knife or screwdriver and insert it at

the bottom corner of the door stop clip.

2.  Pry door stop clip free and remove from front

frame hinge slot. Take care not to scratch
porcelain.

3.  Repeat procedure for other door stop clip.

To remove:

Open the oven door. Insert door removal pins

included with your
range, into both hinge
hangers. Do not remove
the pins while the door
is removed from the
range.

Grasp the door on the sides with your fingers on

the front of the door
and your thumbs on
the inside surface.

Carefully close the door until it rests against the
door removal pins.

To replace:

NOTE: The door removal pins you inserted must still
be in both door hinges.

Grasp the door on the sides with your fingers
on the front of the door and your thumbs on the
inside surface.

Pull door straight up, then toward you. Hinge
hangers will slide out of front frame hinge slot.