Whirlpool RS385PCE Benutzerhandbuch

36

The unit is not wired into a
live circuit with proper voltage.

A household fuse has blown
or a circuit breaker has
tripped.

You have not set the elec-
tronic control correctly.

You have programmed a
delayed start time.

A household fuse has blown
or a circuit breaker has
tripped.

You have not plugged in
surface units all the way.

You are not setting the
control knobs correctly.

You are not pushing in before
turning.

The range clock does not
show the correct time of day.

You have programmed a
delayed start time.

This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, please provide a detailed descrip-
tion of the problem, your appliance’s complete model and serial numbers, and the purchase
date. (See page 3.) This information will help us respond properly to your request.

Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.

Wire the unit into a live circuit with
proper voltage. (See Installation
Instructions.)

Replace household fuse or reset
circuit breaker.

Refer to pages 12-22 for setting the
electronic control.

Wait for the start time to be reached
or cancel and reset the controls.

Replace household fuse or reset
circuit breaker.

Turn control knobs to OFF and plug
in surface units all the way. (See
“Replacing” on page 31.)

Push control knobs in before turning
to a setting.

Push control knob(s) in before turning
to a setting.

Reset clock to show the correct time
of day. (See page 13.)

Wait for the start time to be reached
or cancel and reset the controls.