Whirlpool GERC4110PB0 Benutzerhandbuch

Seite von 60
22
Styles 2 & 3 - Electronic Oven Control 
Before self-cleaning, make sure the door is closed completely or 
it will not lock and the cycle will not begin.
1. Press AUTO CLEAN.
2. Press the TEMP/TIME “up” or “down” arrow pad to set a 
clean time other than 3 hours 30 minutes. The clean time can 
be set between 2 hours 30 minutes and 4 hours 30 minutes.
3. Press START/ENTER.
The oven door will automatically lock. The ON, CLEAN and 
DOOR LOCKED oven indicator lights will light up. The door 
will not unlock until the oven cools.
When the cycle is complete and the oven cools, the oven 
display and the oven indicator lights will go off.
4. Press OFF/CANCEL to clear the oven display.
To Delay Start Self-Clean: 
Style 1 - Electronic Oven Control 
Before delay of starting Self-Clean, make sure the clock is set to 
the correct time of day. See “Clock” section. Also, make sure the 
door is closed completely or it will not lock and the cycle will not 
begin.
1. Press AUTO CLEAN to set a clean time for 2 hours 
30 minutes (Quick Clean). Press AUTO CLEAN again to set a 
clean time for 4 hours 30 minutes (MAXI CLEAN).
2. Press DELAY.
3. Press HR and MIN “up” and “down” pads to enter the time of 
day to stop.
4. Press START.
The start time is automatically calculated and displayed. The 
door will automatically lock at the set start time, and DOOR 
LOCKED or LOCKED and DELAY and the stop time will also 
appear on the display (on some models). The door will not 
unlock until the oven cools.
When the start time is reached, the oven will automatically 
turn on.
When the cycle is complete and the oven cools, DOOR 
LOCKED or LOCKED will disappear from the display.
5. Press OFF/CANCEL to clear the oven display.
Style 2 - Electronic Oven Control
Before delay starting Self-Clean, make sure the clock is set to the 
correct time of day. See “Clock” section. Also, make sure the door 
is closed completely or it will not lock and the cycle will not begin.
1. Press AUTO CLEAN to set a clean time to HI (4 hours 
30 minutes). Press AUTO CLEAN again to change the setting 
to LO (2 hours 30 minutes).
2. Press STOP TIME.
3. Press START.
The start time is automatically calculated. The door will 
automatically lock, and DOOR LOCKED or LOCKED and 
DELAY and the stop time will also appear on the display (on 
some models). The door will not unlock until the oven cools.
When the start time is reached, the oven will automatically 
turn on.
When the cycle is complete and the oven cools, “End” will 
appear on the oven display and DOOR LOCKED or LOCKED 
will disappear from the display.
4. Press OFF/CANCEL to clear the oven display.
Style 3 - Electronic Oven Control 
Delay Start Self-Clean is not available on Style 3 Oven Control.
To Stop Self-Clean anytime:
If the clean function is terminated while the oven cavity 
temperature is greater than 500ºF (260ºC), the oven door will 
remain latched until the oven cavity temperature is below this 
threshold.
Style 1 - Electronic Oven Control 
Press OFF/CANCEL. If the oven temperature is too high, the door 
will remain locked. It will not unlock until the oven cools. If the 
oven temperature is too high after self-cleaning, then LOCKED 
will appear on the display until the oven completely cools.
Style 2 - Electronic Oven Control
Press OFF/CANCEL. If the oven temperature is too high, “cln,” 
TIMED, ON, “cool,” and LOCKED will appear on the display (on 
some models), and the door will remain locked. It will not unlock 
until the oven cools. 
Style 3 - Electronic Oven Control  
Press OFF/CANCEL. If the oven temperature is too high, the door 
will remain locked. It will not unlock until the oven cools. 
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire appliance is cool. These spills 
may affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad: Gently clean around the model and serial number plate 
because scrubbing may remove numbers.
All-Purpose Appliance Cleaner Part Number 31662B (not 
included):
See “Assistance or Service” section to order.
STAINLESS STEEL (on some models)
Do not use soap-filled scouring pads, abrasive cleaners, Cooktop 
Polishing Creme, steel-wool pads, gritty washcloths or some 
paper towels. Damage may occur.
Rub in direction of grain to avoid damaging.
Cleaning Method:
Stainless Steel Cleaner & Polish Part Number 31464B (not 
included): See “Assistance or Service” section to order.
Liquid detergent or all-purpose cleaner: Rinse with clean 
water and dry with soft, lint-free cloth.
Vinegar for hard water spots