Whirlpool SF385PEE Benutzerhandbuch
32
T
ROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you still
need help, see “Requesting Assistance or Service” on page 34.
kind. Check the lists below and on the next page before calling for assistance or service. If you still
need help, see “Requesting Assistance or Service” on page 34.
R
ANGE
DOES
NOT
WORK
CAUSE
•
The range is not properly connected to the gas supply. Contact an autho-
rized service technician to reconnect the range to the gas supply. (See the
Installation Instructions.)
rized service technician to reconnect the range to the gas supply. (See the
Installation Instructions.)
•
You have blown a household fuse or tripped a circuit breaker.
•
The control knob is not set correctly. Push in the control knobs before
turning them.
turning them.
PROBLEM
Nothing works
O
VEN
/
BROILER
BURNER
PROBLEM
The oven does not work
The burner fails to light
The burner flames lift
away from the ports, are
yellow, or are noisy
away from the ports, are
yellow, or are noisy
CAUSE
•
You have not set the electronic control correctly. Refer to the proper
instructions.
instructions.
•
The main or regulator gas shutoff valve is in the off position. (See the
Installation Instructions.)
Installation Instructions.)
•
The ignitor is broken. Contact an authorized service technician to replace it.
•
You have blown a household fuse or tripped a circuit breaker.
•
The air/gas mixture is incorrect. Contact an authorized service technician
to check the air/gas mixture or see the Installation Instructions.
to check the air/gas mixture or see the Installation Instructions.
S
URFACE
BURNERS
CAUSE
•
You have blown a household fuse or tripped a circuit breaker.
•
The burner ports may be clogged. Clean them with a straight pin. (See page 29.)
•
The burner ports may be clogged. Clean them with a straight pin. (See page 29.)
•
The burner needs cleaning. (See page 28.)
•
The air/gas mixture is incorrect. Contact an authorized service technician
to check the air/gas mixture or see the Installation Instructions.
to check the air/gas mixture or see the Installation Instructions.
•
The burner is wet from washing. Let it dry.
PROBLEM
The burner fails to light
The burner flames are
uneven
uneven
The burner flames lift off
the ports, are yellow, or
are noisy when turned off
the ports, are yellow, or
are noisy when turned off
The burner makes a
popping noise when on
popping noise when on