Whirlpool WFG520S0AS Anleitung Für Quick Setup

Seite von 20
5. Place the broil burner on the broil burner orifice hood and insert 
the broil burner ceramic igniter in the hole in the rear of the 
oven.
6. Position the broil burner against the top of the oven and attach 
it with 2 screws.
7. Replace storage drawer, warming drawer or premium storage 
drawer. See the “Storage Drawer” or “Warming Drawer or 
Premium Storage Drawer” section.
8. Replace the oven door. See the “Oven Door” section.
9. Replace the oven racks.
Complete Installation (LP Gas to Natural Gas)
1. Refer to the “Make Gas Connection” section for properly 
connecting the range to the gas supply.
2. Refer to the “Electronic Ignition System” section for proper 
burner ignition, operation, and burner flame adjustments.
IMPORTANT: You may have to adjust the “LO” setting for each 
cooktop burner.
Checking for proper cooktop, bake and broil burner flame is 
very important. Natural gas flames do not have yellow tips.
3. Refer to “Complete Installation” in the “Installation Instructions” 
section of this manual to complete this procedure. 
NOTE: Make sure to save the orifices that have just been 
replaced in the conversion.
W10526974A
®
/™ ©2012 Whirlpool. All rights reserved.
7/12
Printed in U.S.A.