Whirlpool RY160LXTQ Benutzeranleitung

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” section.

■

Mild detergent

Remove all stored items from drawer and lift out drawer liner.

■

Clean with mild detergent

■

All-Purpose Appliance Cleaner Part Number 31682 (not 
included):

See “Assistance or Service” section to order.

The oven light is a standard 40-watt appliance bulb. Before 
replacing, make sure the oven and cooktop are cool and the 
control knobs are in the off position.

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door to the first stop position (opened about 

4" [10.0 cm]).

2. Grasp door at each side. Do not use the door handle to lift 

door.

3. Lift up evenly until door clears hinge arms.

1. Grasp door at each side.

2. Align slots in the door with the hinge arms on the range.

3. Slide the door down onto the hinge arms until the door is 

completely seated on the hinges. Push down on the top 
corners of the door to completely seat door on hinges. Door 
should not appear crooked.

The storage drawer can be removed. Before removing, make sure 
drawer is cool and empty.

1. Pull storage drawer out to the first stop position.

2. Lift up the front of the drawer and pull the drawer out to the 

second stop position.

3. Grasp sides and lift drawer top up and out.

1. Fit the ends of the drawer glides into the rails in the range.

2. Lift up the front of the drawer and gently push in to the first 

stop position.

3. Lift drawer up again and push until drawer is closed.

■

Has a household fuse blown, or has a circuit breaker 
tripped? Replace the fuse or reset the circuit.

■

Is the control knob set correctly? Push in knob before 
turning to a setting.

■

Is the cookware the proper size? Use cookware about the 
same size as the surface cooking area, element or surface 
burner. Cookware should not extend more than ½" (1.3 cm) 
outside the cooking area.

Hot Surface indicator light stays on (on some models)

■

Does the Hot Surface indicator light stay on after control 
knob(s) have been turn off? See “Cooktop Controls” 
section.

■

Is the proper cookware being used? See “Cookware” 
section.

■

Is the control knob set to the proper heat level? See 
“Cooktop Controls” section.

■

Is the range level? Level the range. See the Installation 
Instructions.

■

Is the electronic oven control set correctly? See 
“Electronic Oven Control” section.

■

Has a delay start been set? See “Cook & Hold” section.

■

On some models, is the Control Lock set? See “Control 
Lock” section.