Brother XL-3500i Benutzeranleitung

G

ett

ing
 Read

y

11

When switching on the machine, the screen will display the name of the machine. Touch the screen to 

display the utility stitch. Either “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is selected, 

depending on the setting selected in the setting screen (see page 16).

Press a key with your finger to select the stitch pattern, to select a machine function, or to select an 

operation indicated on the key. 

a Shows single or twin needle mode setting, and the needle stop position.

b Shows the presser foot code. Attach the presser foot indicated in this display before sewing.

c Shows the name and code number of the selected stitch.
d Shows a preview of the selected stitch.

e Shows the stitch patterns.

f Shows additional pages that can be displayed. 

*

All key functions of the LCD are explained in the “key functions” table on the following page.

• When the straight stitch needle plate is on the machine, the needle will automatically move to the mid-

dle position.

• Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screw-

driver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard 
or using a sharp object may damage the screen.

Single needle/down position

Single needle/up position

Twin needle/down position

Twin needle/up position

b

c

d

e

f

a