Brother XL-3500i Benutzeranleitung
LOWER THREADING
28
Pulling Up the Bobbin Thread
There may be some sewing applications where
you want to pull up the bobbin thread; for
example, when making gathers, darts, or doing
free motion quilting or embroidery.
you want to pull up the bobbin thread; for
example, when making gathers, darts, or doing
free motion quilting or embroidery.
a
a
a
a
Guide the bobbin thread through the
groove, following the arrow in the
illustration.
groove, following the arrow in the
illustration.
*
Do not cut the thread with the cutter.
*
Do not replace the bobbin cover.
b
b
b
b
While holding the upper thread, press the
needle position button to lower the needle.
needle position button to lower the needle.
a Needle position button
c
c
c
c
Press the “Needle Position” button to raise
the needle.
the needle.
d
d
d
d
Gently pull the upper thread, and a loop of
the bobbin thread will come out of the hole
in the needle plate.
the bobbin thread will come out of the hole
in the needle plate.
e
e
e
e
Pull up the bobbin thread, then pass it
under the presser foot and pull it about
100 mm (approx. 3-4 inches) toward the
back of the machine, making it even with
the upper thread.
under the presser foot and pull it about
100 mm (approx. 3-4 inches) toward the
back of the machine, making it even with
the upper thread.
a Upper thread
b Bobbin thread
f
f
f
f
Replace the bobbin cover.
Memo
You can pull up the bobbin thread after thread-
ing the upper thread (see “UPPER THREAD-
ING” on page 29).
ing the upper thread (see “UPPER THREAD-
ING” on page 29).
a
a
b
b