Brother NC-4100H Benutzerhandbuch
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-3
Brother Internet Print
Configuring the Brother Print Server
Configuring the Brother Print Server
The print server can be configured with BRAdmin configuration utility, by using a
web browser, or by using the TELNET command.
web browser, or by using the TELNET command.
Print Server Configuration Checklist
Before configuring the print server to receive BIP jobs, be sure that the E-mail server
at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and
SMTP protocols (SMTP is only required if the notification feature is enabled).
at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and
SMTP protocols (SMTP is only required if the notification feature is enabled).
1.
Configure the POP3 server on the E-mail server at the remote site with a
mail account (Mailbox name) and password for the Brother print server
(generally, the mail account name will be the first part of the Email address;
for example, if you assign the Email address emailprinter@xyz.com, then
the mail account name would be emailprinter).
mail account (Mailbox name) and password for the Brother print server
(generally, the mail account name will be the first part of the Email address;
for example, if you assign the Email address emailprinter@xyz.com, then
the mail account name would be emailprinter).
2.
Make sure that the print server is installed and running with TCP/IP enabled
and has a valid IP address assigned to it.
and has a valid IP address assigned to it.
Because access to the E-mail server on most networks is usually restricted, you may
need to have your network administrator check the configuration and add the mail
account.
need to have your network administrator check the configuration and add the mail
account.