Wacom Intuos Benutzerhandbuch

     Page  110

•

  Maps the selected tablet area to the selected screen area.  The scale and the vertical and 

horizontal proportions are not maintained.  To set the scale, click the S

CALE

 button.  In the S

ET

 

S

CALE

 F

ACTOR

 dialog box, enter values to define the tablet to screen ratios for the x and y axes.  

The ratio between x- and y-scale factor indicates how much a traced image will be distorted by the 
mapping relationship between tablet and screen.  For example, an x-scale factor of 2 makes two 
inches on the tablet’s x axis equal to one inch on the screen’s x axis.  A y-scale factor of 3 makes 
three inches on the tablet’s y axis equal to one inch on the screen’s y axis.

•

  Sets the area to position the screen cursor in Mouse Mode.

5. Define the size of the display area by dragging the handles of the selected display area.  Then click 

and drag the display area to the desired position.  For more precise control in selecting the display 
area, click the S

ET

 D

ISPLAY

... button to access the 

 dialog box.  There, you can define 

the display area in a variety of ways.

6. To create additional tablet mappings, click on the A

DD

 M

APPING

 button.  A new mapping is created with 

the entire tablet area mapped to the entire display area.  Repeat the above steps to size and position 
the tablet and display areas for each mapping you add.
If you define overlapping tablet areas, the tablet area with a lower number will always be above (in front 
of) the areas with a higher number and will have precedence for positioning the pointer on the screen.  
Use the B

RING

 

TO

 F

RONT

 and S

END

 

TO

 R

EAR

 buttons to change the relative positions of the maps.  For 

example, if you have created multiple mappings, S

END

 

TO

 R

EAR

 will move a selected mapping to the 

“bottom” of the stack.