Wacom Graphire - Bluetooth for Windows & Macintosh Benutzerhandbuch

 

10

10

 

Before using the tablet battery for the first time, Wacom recommends that you plug in the power adapter 
and allow the battery to charge.  You can continue with the installation process and you can work with the 
tablet while the battery is being charged.  The battery will take approximately five to six (5 to 6) hours to fully 
charge.  Note that fully charging or discharging the battery does not extend the battery life as Li-Poly 
batteries do not have a memory.

 

 To check the current battery charge status, open the Pen Tablet control panel and go to the T

 

ABLET

 

 

tab.  See 

.

 

 Plug in the power adapter and recharge the battery before it gets too low.  This will ensure the tablet 

battery is always ready for mobile operation.

Power connector port.

To charge the battery: Plug the round end of the power adapter 
into the tablet power connector port.  Then connect one end of 
the adapter’s power cable to the power adapter, and the other 
end to an active power outlet.

Note: You should charge the battery whenever its charge is low, 
as indicated by a low battery alert on your screen.  When the 
power indicator light starts flashing, the battery is nearly empty 
and the tablet will soon cease to function properly.

The charging indicator glows orange when 
charging, and green when fully charged.

Power connector port.