Worksaver SDM40-48 Benutzerhandbuch

Seite von 40
OWNER’S /
OPERATOR’S
MANUAL
MODEL NO’s
SDM40-48
SDM40-60
SDM40-72
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SINO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
S A F E T Y   P R E C A U T I O N S
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.
AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
• Machinery should be operated only by those who 
are responsible and are authorized to do so.
• Stop the engine, lower all equipment, lock the 
brakes, and remove the ignition key before dis-
mounting from the tractor.
• Never stand between tractor and implement while 
tractor is being backed to hitch.
• Loose fitting clothing should not be worn, to avoid 
catching on various parts.
• Detach implement in area where children normally 
do not play.
• When performing adjustments or maintenance on
an implement, first lower it to the ground or block it
securely at a workable height.
• Only a qualified operator should be permitted on
tractor when in operation; no riders allowed.
• Make certain everyone is in the clear before starting 
tractor or raising or lowering equipment.
• Operate the tractor and implement only while
seated in the driver’s seat.
• Reduce speed when transporting mounted
implements to avoid bouncing and momentary loss
of steering control.
• A heavy load can cause instability of the tractor.
Use extreme care during road travel. Slow down on 
turns and watch out for bumps. Tractor may need
front counter-weights to counter-balance the weight
of the implement.
• Reduce speed on hillsides or curves so there is no 
danger of tipping.
• Avoid driving too close to the edge of ditches or 
creeks.
• Do not transport implement on public roads without 
reflectors and slow moving vehicle emblem in
daylight and with approved warning lights at night
and other periods of poor visibility.
• Due to the width of some implements, use extra
caution on highways, farm roads, and when
approaching gates.
• Always be sure the implement is in the proper
position for transport.
• Keep alert and watch the front as well as the rear 
when working with the implement.
OWNER’S /
OPERATOR’S
MANUAL
MODEL NO’s
SDM40-48
SDM40-60
SDM40-72
WHEN ORDERING
REPAIR PARTS,
ALWAYS GIVE
THE FOLLOWING
INFORMATION:
1.  PART NUMBER
2.  PART DESCRIPTION
3.  MODEL NUMBER
4.  NAME OF ITEM
OCTOBER 2001
WS-RM002-OG
W O R K S AVER, INC.
P.O. BOX 100    LITCHFIELD, IL 62056-0100    (217) 324-5973
WEB: http:// www.worksaver.com    E-MAIL: sales@worksaver.com
Equip tractors with roll-over protection
(ROPS) and keep all machinery guards in
place.
Keep children away from danger all day,
every day . . .
Please work, drive, play and live each day
with care and concern for  your safety and
that of your family and fellow citizens.
MAKE EVERY DAY
A HOLIDAY
FROM ACCIDENTS
STANDARD DUTY 3-PT. MOUNTED
ROTARY CUTTER
Safety Instructions
Operating Instructions
Maintenance
Tractor Preparation
Assembly & Mounting
Repair Parts
C A U T I O N
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
1. Select an area for assembly that is clean and free
of any debris which might cause persons working
on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane,
jack, tackle, fork trucks or other mechanical devices.
3. Preview the assembly instructions in your opera-
tor’s manual before proceeding further.
4. If the assembly instructions call for parts or assem-
blies to be blocked up, use only blocking material
that is in good condition and is capable of handling
the weight of the assembly to be blocked. Also
insure that the blocking material is on a clean, dry
surface.
5. Never put hands, or any part of body, under
blocked up assemblies if at all possible.
6. After completing assembly, thoroughly inspect the
machine to be sure that all nuts, bolts, hydraulic fit-
tings or any other fastened assemblies have been
thoroughly tightened.
7. Before operating the machine, thoroughly read the
operation section of your operator’s manual.
8. Before operating, read the maintenance section of
your operator’s manual to be sure that any parts
requiring lubrication, such as gearboxes, are full, to
avoid any possible damage.
9. Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your Worksaver dealer or
representative.