Whirlpool 1188694 Benutzerhandbuch

Seite von 12
3
 AIR PURIFIER SAFETY 
      
INSTALLATION REQUIREMENTS
Electrical Requirements  
Electrical Connection
To properly install your air purifier, you must determine the type of 
electrical connection you will be using and follow the instructions 
provided for it here.
The air purifier should be connected to a 115 V, 60 Hz, 15- or 
20-amp fused 3 prong grounded outlet.
The use of a time-delay fuse or time-delay circuit breaker is 
recommended.
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: 
To Reduce The Risk Of Fire or Electrical Shock, Do Not Use The Air Purifier With Any Solid-State Speed 
Control Device.
WARNING: 
To Reduce The Risk Of Fire Or Electrical Shock And Injury To Persons, Do Not Use In A Window.
Unplug air purifier before servicing.  
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.