Welch Allyn Medical Diagnostic Equipment 12500 Benutzerhandbuch

Seite von 12
1-5
To Change the Battery
Unscrew the two screws which hold the housings
together. Be certain not to touch the green circuit
board or any of the components on it. Disconnect
the old battery pack from the connector and
attach a new battery pack. Install the battery
pack with label facing you, as shown. Be 
sure the battery pack connector and wire
lies across the bottom edge of the housing, 
as shown. Use only Welch Allyn No. 72240
rechargeable battery pack.
BATTERY
DISCONNECT
CONNECT
Cleaning
All external surfaces may be cleaned with 
a soft cloth moistened with alcohol.
Symbol Descriptions
Attention. Read Operating Manual for 
Cautions and Instructions for Use.
TYPE B Equipment.
TYPE BF Equipment.
Double Insulation.
Indoor Use Only.
Licensed under TÜV to conform with IEC 601-1.
Recognized component UL 2601-1.
Internally Powered.
The CE mark on this product indicates it has been 
tested to and conforms with the provisions noted 
within the 93/42/EEC Medical Device Directive.
Authorized European Representative Address:
European Regulatory Manager
Welch Allyn, Ltd.
Kells Road, Navan, 
Tel. 353 46 28122
County Meath, Republic of Ireland
Fax 353 46 28536
+