Walker W300 Benutzerhandbuch

14

responding to these prompts. In summary,
dial the phone number you want to call in
pulse mode, switch to tone mode to inter-
act with the automated answering system,
switch back to pulse mode when your call
is done. When switching from Pulse to
Tone during a call, there will be a 3 second
delay from the time you first push a key in
tone mode until the key press is transmit-
ted. You cannot switch from tone to pulse
during a call.

Important: You must have tone signaling
service to use the TONE feature on the
Walker W300. If in doubt, contact your
local telephone company.

➤ To Set the

1. Move the switch towards the
correct setting.

2. Depress the hookswitch once.

3. The phone will now dial in the mode
you selected.

➤ Last Number Redial

Last Number Redial allows you to auto-
matically redial the last telephone number
you called. This feature is convenient for

redialing numbers which are busy. The
phone number stored for redial will be
reset with every new call you make.

➤ To Operate

1. Depress the hookswitch to get a new
dial tone.

2. Press the “Redial” Button once.

3. Stay on the line, and your call will
be dialed.

The last number dialed will be stored in
the Walker W300 for you until you dial
another number or disconnect the tele-
phone from the wall jack.

➤ Flash

Flash is a special feature that is required
to use some calling services provided
by your local phone company, such as
call waiting. Consult your guide to these
services which is available from your local
phone company. Flash serves the same
purpose as pressing and releasing the
hook switch very quickly.

W300_UGD_REVD_7.29.02

8/1/02, 6:29 AM

14