Walker W300 Benutzerhandbuch
E
N
G
G
L
I
S
H
17
PROGRAMMING NUMBERS INTO MEMORY
➤ Programming
The Walker W300 allows you to program
into three extra large programmable
buttons or seven memory keys. By
doing so, you will only have to press one
button to place a call.
into three extra large programmable
buttons or seven memory keys. By
doing so, you will only have to press one
button to place a call.
Preprinted inserts have been provided for
you to place in the extra large program-
mable buttons. To remove the button
covers, locate the ridge on the right and
left side of the button. Grasp the ridge with
your finger tips and pull up on the button,
removing it from the telephone. Insert the
selected symbol into the button cover and
place back into the telephone.
you to place in the extra large program-
mable buttons. To remove the button
covers, locate the ridge on the right and
left side of the button. Grasp the ridge with
your finger tips and pull up on the button,
removing it from the telephone. Insert the
selected symbol into the button cover and
place back into the telephone.
➤ To Program Numbers into
the Walker W300 Telephone
1. Select the location you wish to store for
each memory button. The Walker W300
telephone will let you store up to 32 digits
with each button.
each memory button. The Walker W300
telephone will let you store up to 32 digits
with each button.
2. Select the correct TONE/PULSE
setting you normally dial in. (Remember,
some long distance services require
TONE dialing.)
setting you normally dial in. (Remember,
some long distance services require
TONE dialing.)
3. Pick up the handset from the phone
base, press and release the “PRO-
GRAM” button on the base unit.
base, press and release the “PRO-
GRAM” button on the base unit.
4. Dial the number you wish to store.
The number is not transmitted while you
are programming it.
The number is not transmitted while you
are programming it.
5. Press the “PROGRAM” button again.
6. Select the appropriate memory storage
button. Press and release this button.
button. Press and release this button.
7. Place handset back into cradle.
8. Repeat steps 3 through 7 for all other
memory storage locations.
memory storage locations.
Note: You can program a pause into the
dialing sequence if necessary. Since there
is not a pause button on the telephone, the
redial button serves this purpose during
programming. Programming in a pause
will cause the phone to wait 3 seconds
before dialing any more numbers. For
Example: Pressing a memory button that
has 9 (pause) 555-1212 programmed into
it will dial the number 9, then wait 3 sec-
onds and dial 555-1212. In most cases,
you will not need to use a pause. You can
store up to 32 digits and the pause func-
tion counts as 1 of those digits.
dialing sequence if necessary. Since there
is not a pause button on the telephone, the
redial button serves this purpose during
programming. Programming in a pause
will cause the phone to wait 3 seconds
before dialing any more numbers. For
Example: Pressing a memory button that
has 9 (pause) 555-1212 programmed into
it will dial the number 9, then wait 3 sec-
onds and dial 555-1212. In most cases,
you will not need to use a pause. You can
store up to 32 digits and the pause func-
tion counts as 1 of those digits.
➤ To Dial Programmed Numbers
1. Pick up the handset and listen for a
dial tone.
dial tone.
2. Press the appropriate Memory
Storage Button.
Storage Button.
3. The number will be dialed automatically.
W300_UGD_REVD_7.29.02
8/1/02, 6:30 AM
17