Sprint Nextel SP-809 Benutzerhandbuch
39
Remote Operation
USING REMOTE COMMANDS
Whether you are using the handset or calling from a touch-tone
phone, you press the same buttons to operate the TAD. The only
difference is the way you connect with the answering system.
phone, you press the same buttons to operate the TAD. The only
difference is the way you connect with the answering system.
From a remote touch-tone phone:
Dial your phone number. When the TAD answers, enter your
remote access code. The TAD announces the number of mes-
sages and beeps twice to confirm that you entered the correct
code.
sages and beeps twice to confirm that you entered the correct
code.
Notes:
²
If you do not enter each digit of the remote access code
within 8 seconds, the TAD hangs up.
²
If the TAD is not set to answer calls or the memory is full, it
will answer after 10 rings.
From the handset:
Press
ANS SYS
. The ANS SYS indicator lights. The TAD
announces the number of messages and beeps twice.
After connecting with the TAD, enter a remote command (see “Re-
mote Commands” on Page 40), or press
mote Commands” on Page 40), or press
5
to hear voice prompts,
or wait until the TAD begins playing all messages (after about 4
seconds).
seconds).
When you finish, simply hang up (remote phone) or press
ANS
SYS
(SP-809’s handset).
43-5809.fm Page 39 Wednesday, August 18, 1999 1:43 PM