Spectralink SpectraLink 8002 Benutzerhandbuch

Seite von 99
SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP) 
52 
PN: 1725-36034-001_B.doc 
# PROXYn_MAIL_NOTIFY is from whom we might get unsolicited mail center  
# notifications 
# This option is deprecated and no longer needed in versions beyond  
# e/h340/i640 phones v108.011, Polycom 8002 phones v130.001, and Polycom  
# 8020/8030 phones 131.001. 
# Examples: 
#PROXY1_MAIL_NOTIFY = asterisk@10.0.0.138 
#PROXY1_MAIL_NOTIFY = sip:asterisk@10.0.0.138 
 
# PROXY1_MAIL_ACCESS is the main voicemail dial number 
# Examples:  
# PROXY1_MAIL_ACCESS = 7999 
# PROXY1_MAIL_ACCESS = sip:7999@10.0.0.138 
# PROXY1_MAIL_ACCESS = 7999@10.0.0.138 
PROXY1_MAIL_ACCESS = 7999 
 
#PROXY1_KEYPRESS_2833 controls generation of in-stream RFC2833 formatted key  
# press events. Normally you want this to be disabled for Asterisk but it  
# depends on your configuration and what you want to be able to do. 
# If you are going to do OAI integration, this must be disabled. 
# The default is disable 
PROXY1_KEYPRESS_2833 = disable 
 
#PROXY1_KEYPRESS_INFO controls generation of SIP INFO requests to the SIP  
# server for keypress events.  Normally you want this to be enabled. 
# If you are going to do OAI integration, this must be enabled. 
# The default is enable 
PROXY1_KEYPRESS_INFO = enable 
 
# PROXYn_HOLD_IP0 controls setting of media stream IP destination to 0.0.0.0  
# when a call is put on hold. 
# PROXYn_HOLD_IP0 is not required for current versions of Asterisk. 
# For older PBXs that require this, set this to enable 
#PROXYn_HOLD_IP0 = enable 
 
# PROXY1_PRACK enables ACK'd provisional responses to INVITE requests.  The  
# PRACK mechanism will be used if this switch is enabled and the Proxy server  
# specifies support for the PRACK mechanism.  PRACK is NOT SUPPORTED in  
# current versions of Asterisk, but is to be supported on subsequent  
# versions.  PRACK should not be required on local area networks. 
PROXY1_PRACK = disable 
 
# PROXYn_KEEPALIVE_SECS specifies that the phone should send Keep alives to  
#  the PROXYn server.  It can be set to 0 or anywhere from 10 to 3600  
#  seconds. The default value (which is applied if no parameter is supplied  
#  in this file) is 0 which means the phone will not send keep_alives to  
#  PROXYn. 
#  If the phone fails to get a keepalive response within the SIP 32 second  
#  timeout, the keepalives are terminated for that PROXY until the next  
#  successful registration to the PROXY. 

#  This parameter is REQUIRED on Asterisk Business Edition with the Polycom  
#  8002 phone but not with the Polycom 8020/8030 phones.  This is because  
VoIPon    www.voipon.co.uk    sales@voipon.co.uk    Tel: +44 (0)1245 808195     Fax: +44 (0)1245 808299