Roland BR-600 Benutzerhandbuch
187
With Macintosh
Re
v0.10
v0.10
Section 5
6
Quit the connection to the computer.
1) Drag the “BOSS_BR-600” icon into the trash.
7
Press [EXIT] repeatedly to return to the Play screen.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear.
In this case, pressing [ENTER] and then [EXIT] returns the
Play screen to the display.
In this case, pressing [ENTER] and then [EXIT] returns the
Play screen to the display.
fig.05-800
At this point, you can safely disconnect the USB cable
from the BR-600 and the computer.
from the BR-600 and the computer.
8
Press [UTILITY].
9
Press CURSOR [
] [
] to move the cursor to
“TONE,” and press [ENTER].
fig.05-810
10
Press CURSOR [
] [
] to move the cursor to
“CARD,” and press [ENTER].
The names of the WAV and AIFF files on the memory
card are displayed.
card are displayed.
* WAV files are indicated by the symbol “.W”; “.A” indicates
AIFF files.
fig.05-820
11
Use the TIME/VALUE dial to select the WAV or AIFF file
you want to load as the drum sound, then press [ENTER].
12
Turn the TIME/VALUE dial to specify the load-
destination song drum kit.
S1–5 :
Song Drum Kit 1–5
fig.05-830
13
Turn the TIME/VALUE dial to select the load-
destination song drum sound, then press [ENTER].
The load is executed.
To cancel, press [EXIT].
To cancel, press [EXIT].
fig.05-840
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
processed.
You can preview the sound of the WAV or AIFF file to
be loaded by moving the cursor to “PVW” and
pressing [ENTER].
be loaded by moving the cursor to “PVW” and
pressing [ENTER].
WAV and AIFF files in the TONELOAD folder are
retained without being deleted even after this
procedure is completed.
If these files are no longer needed, connect the BR-600
to your computer via USB and use the computer to
delete the files. Any files that are retained will use the
required amount of memory on the memory card.
retained without being deleted even after this
procedure is completed.
If these files are no longer needed, connect the BR-600
to your computer via USB and use the computer to
delete the files. Any files that are retained will use the
required amount of memory on the memory card.
BR600_e2 187 ページ ２００６年４月１７日 月曜日 午前９時３分