Razor Riding Toy 300001-SL Benutzerhandbuch

2

       WARNING: 

DO NOT USE NON-RAZOR 
PARTS WITH YOUR 
GROUND FORCE.  

The Ground Force has been built to 

certain Razor design specifications. 

The original equipment supplied 

at the time of sale was selected 

on the basis of its compatibility 

with the frame and all other parts. 

Certain aftermarket components 

may not be compatible. Use of non-

Razor parts will void the warranty.

       WARNING: Turn power 

switch off before conducting any 

maintenance procedures.

q 

(2) 5mm Allen wrench

3mm Allen wrench

(included)

8/10/19mm wrench

(not included)

13/17mm wrench

(not included)

Screwdriver

(not included)

Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers 
at 

www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

Remove contents from box. Remove the foam separators that protect the components from damage during 

shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have 

occurred during shipping. Because the Ground Force was 95 percent assembled and packed at the factory, 

there should not be any problems, even if the box has a few scars or dents.

Razor recommends assembly by an adult. 

Allow up to 45 minutes for assembly, not including initial charge time. 

Allow up to 12 hours for initial charge (see page 5 for charging information).

Speed Control / Thumb Throttle

Steering Wheel

Wheel

Charger Port

Tie Rod

Brake Adjustment 

(Auxiliary)

Chain Adjuster

Brake Lever

Charger 

Plug 

Charger 

Port

On/Off Switch

Charger 

(Note: Charger design may 

vary from one shown)