ZyXEL Communications Security Camera 3.1 Benutzerhandbuch

 Chapter 46 Maintenance Tools

ZyWALL (ZLD) CLI Reference Guide

• IP address: any
• Host  IP:  any
• Host port: any (then you do not need to configure this setting)
• File suffix: Example
• File size: 10 megabytes
• Duration: 150 seconds
• Save the captured packets to: USB storage device
• Use the ring buffer: no
• The maximum size of a packet capture file: 100 megabytes

Exit the sub-command mode and have the ZyWALL capture packets according to the settings you 
just configured.

Manually stop the running packet capturing.

Check current packet capture status and list all stored packet captures.

You can use FTP to download a capture file. Open and study it using a packet analyzer tool (for 
example, Ethereal or Wireshark).

Router(config)# packet-capture configure

Router(packet-capture)# iface add wan1

Router(packet-capture)# ip-type any

Router(packet-capture)# host-ip any

Router(packet-capture)# file-suffix Example

Router(packet-capture)# files-size 10

Router(packet-capture)# duration 150

Router(packet-capture)# storage usbstorage

Router(packet-capture)# ring-buffer disable

Router(packet-capture)# split-size 100

Router(packet-capture)#

Router(packet-capture)# exit

Router(config)# packet-capture activate

Router(config)#

Router(config)# no packet-capture activate

Router(config)#

Router(config)# show packet-capture status

capture status: off

Router(config)# dir /packet_trace

File Name                                          Size     Modified Time

===========================================================================

wan1-Example.cap                                   575160   2009-11-24 09:06:59

Router(config)#