Vocopro DTX-9909K Benutzerhandbuch

Connecting Microphones

You can connect up to 2 microphones to the DTX-9909K

using ¼” microphone cables.

What you will need

• 2 microphones

• 2 ¼” microphone cables

Connect the ¼” end of the microphone cable to one of the

microphone inputs, MIC 1 or MIC 2, on the front panel.

Adjusting the Microphone Volume

Use the microphone volume controls on the front panel to

adjust the volume for each microphone channel

1. Turn the control clockwise to raise the microphone

volume

2. Turn the control counter clockwise to lower the

microphone volume

Connecting Headphones

You can connect headphones to the DTX-9909K using

headphones with a ¼” jack.

Connect the ¼” headphone cable to the headphone input

jack on the DTX-9909K front panel

Headphone Notes

• Do not play the headset at a high volume. Hearing experts

advise against continuous, extended play

• If you experience a ringing in your ears, reduce volume or

discontinue use

• Always turn down the volume before connecting your

headphones

• The speakers are turned off while the headphones plug is

connected to the headphone jack

• When you connect a pair of headphones, the listening

mode is set to stereo unless it is already set to 2-Ch

stereo. When you disconnect the headphones, the

previous listening mode will resume

• When the multi-channel input is used, only the front left

and right audio can be heard in the headphones

Getting Connected cont.