VIVOTEK Vivotek Automobile Electronics vc8201 Benutzerhandbuch

 

 

Authentication: Depending on your network security requirements, the Network Camera provides three 

types of security settings for streaming via RTSP protocol: disable, basic, and digest. 

If 

 authentication is selected, the password is sent in plain text format, but there can be potential 

risks of it being intercepted. If 

 authentication is selected, user credentials are encrypted using 

MD5 algorithm, thus providing better protection against unauthorized access. 

The availability of the RTSP streaming for the three authentication modes is listed in the following table:

Access name for Channel # and stream #: This Network camera supports multiple streams 

simultaneously. The access name is used to differentiate the streaming source. 

If you want to use an 

RTSP player

 to access the Network Camera, you 

HAVE TO set the video mode to 

H.264 

and use the following RTSP URL command to request transmission of the streaming data.

rtsp://<ip address>:<rtsp port>/<access name for stream1 ~ 3>

For example, when the access name for 

stream 1

 is set to 

live.sdp

:

1. Launch an RTSP player.

2. Choose File > Open URL. A URL dialog box will pop up.

3. Type the above URL command in the address field. 

4. The live video will be displayed in your player as shown 

    below.

rtsp://192.168.5.151:554/live.sdp

Quick Time player

VLC Player

Disable

O

O

Basic

O

O

Digest

O

X

Video 16:38:01 2011/03/25

An original, circular view will be displayed using all RTSP players. For access to the Regional 

Views, you can install VIVOTEK's ST7501 or VAST software. You can right-click on a live view 

window to see the Display mode 

options.