Venturer STB7766G Benutzerhandbuch

Seite von 20
- 18 -
TROUBLESHOOTING GUIDE
MAINTENANCE
Specifi cations and external appearance are subject to change without notice.
Cleaning the Unit
•  Be sure to turn the unit off and disconnect the AC adapter before maintaining the unit.
•  Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that 
has been dipped in a weak soap-and-water solution and wrung out thoroughly. Wipe with a dry 
cloth.
•  Never use alcohol, benzine, thinner, cleaning fl uid or other chemicals. Do NOT use compressed 
air to remove dust.
SYMPTOM 
CAUSE (AND REMEDY) 
 
•   Ensure the AC adapter is connected.
•  The unit is not turned on.
•   Try to tune to another channel. 
•  Make sure the antenna connected.
•  Adjust the antenna for a stronger signal.
•  This system does not support cable TV.
•  Make sure you have connected your audio system correctly.
•  Try to tune to another channel. Sometimes broadcasters have problems 
with DTV audio encoding.
•  Make sure the MUTE function on your TV is not set.
•   Remove any obstacles between the remote and the unit.
•   Use the remote near the unit.
•  Point the remote at the remote sensor on the unit.
•  Replace the batteries in the remote.
No power.
Intermittent signal, 
or no signal at all
Poor sound quality, 
or no sound
Remote control 
doesn’t work 
correctly
811-776691W012.indd   18
811-776691W012.indd   18
12/18/2008   10:40:39 AM
12/18/2008   10:40:39 AM