Vertek/XTC SCORPION 2330 Benutzerhandbuch

 If only one pair of speakers are being used they should be connected to channel 
A. Observe the correct polarity when you connect speakers or poor quality sound 
will result. Also, be careful to make sure there are no shorts in the speaker wiring 
and the correct impedance speakers are used.

For one pair of speakers, each speaker may be between 4 and 16 ohms. When 2 
pairs of speakers are used, each speaker must be 8 or 16 ohms. For multiple 
speaker systems (eg. ceiling speakers) use transformers to convert the system to 
100V line or wire the speakers in a series/parallel combination to ensure the load 
presented to the 2330 is not lower than specified.

Caution: Improper connection may cause damage to the unit.

1

2

3

4

Right Speaker

1

2

3

4

8 ohm

8 ohm

4 ohm

4 ohm

4 ohm

4 ohm

4 ohm

4 ohm

Example 1
Connecting 
2 speakers
to a channel

Example 2
Connecting 6 
speakers to a 
channel without 
using transformers