Uniden G955 Benutzerhandbuch

10

 

•

Optimized motion detection range is 6 - 18 feet for the GC45 camera. The farther away an object 
is, the less accurate the motion detection.

 

•

Avoid having a direct light source in the view of the camera, including street lights, ceiling or 
floor lamps, spotlights in the driveway, etc.

 

•

Rainfall, pool water ripples/reflections, tree/shrub leaves blowing in the wind - and the shadows 
they create - can generate motion detection false alarms.

You can mount the camera with the stand on the bottom (on a wall or table-top) or on the top (on 
the ceiling). When you are positioning the camera, you might want to bring the monitor along; it’s 
much easier to get the camera into the right position when you have the display handy.

1.  Hold the base of the camera stand where you want to mount it and mark the location of the 

screw holes. 

2.  Use the included screws and anchors to attach the base to the wall or ceiling.
3.  Before attaching the camera, tug gently on the stand to make sure it is securely in place.

1. For each camera, 

attach the camera 
bracket to the 
mounting screw. 
You can attach the 
stand to the top or 
the bottom of the 
camera as needed.
Tighten it a few 
turns, then turn 
the camera to face 
the direction you 
want. 

Loosen the 

wingnut to 

unlock the 

mounting 

post.

Attach the camera 

to the mounting 

screw and turn it 

to the desired 

direction.

Adjust the post to 

the correct angle, 

then tighten the 

wingnut to lock the 

post into place.

Tighten the brace against 

the camera to

secure it

in place.