Uniden APPCAM25HD Benutzeranleitung
12
Your camera will reboot and reconnect to the router. If using the wired
set up process, unplug the Ethernet cable from the router and camera
during the reboot process. Wait 2 - 3 minutes until the camera’s LEDs
both return to the steady on state to continue.
set up process, unplug the Ethernet cable from the router and camera
during the reboot process. Wait 2 - 3 minutes until the camera’s LEDs
both return to the steady on state to continue.
4. The camera screen indicates that it is disconnected. Tap the System icon
and then the Refresh icon. The camera refreshes and reconnects to the
router you chose. The app displays a snapshot of the video image.
At this point, both the red and green LEDs are steady on.
STEP 4 - SET TIME ZONE/DAYLIGHT SAVINGS TIME
It is important to set the correct time zone and daylight savings time indication
on your camera to ensure correct date/time stamp on the video files.
on your camera to ensure correct date/time stamp on the video files.
1. Access the Advanced Settings list (see Connect Camera and WiFi Router,
described previously.
2. From the Advancd Settings list, scroll to Time Zone.
3. Select your time zone. The most commonly used time zones are:
3. Select your time zone. The most commonly used time zones are:
ͳ
GMT-05:00 - Eastern Standard
ͳ
GMT-06:00 - Central Standard
ͳ
GMT-07:00 - Mountain Standard
ͳ
GMT-08:00 - Pacific Standard
ͳ
GMT-09:00 - Yukon Standard
ͳ
GMT-10:00 - Alaska-Hawaii Standard
4. Set the Daylight Savings Time indicator.
5. Tap Back, and exit the Advanced Settings list.
5. Tap Back, and exit the Advanced Settings list.