Synology DS411slim Benutzerhandbuch
Synology DiskStation User's Guide
Based on DSM 4.0
159 Chapter 17: Perform Advanced Management Tasks
Reinstall Synology DiskStation
If you want to reinstall your Synology DiskStation without losing its data, you can use the
RESET
button on the
back panel.
To reinstall Synology DiskStation:
1 Press and hold the
RESET
button for about 4 seconds until the Synology DiskStation emits a beep sound.
2 Within the next 10 seconds, press and hold
RESET
button for about 4 seconds until the Synology DiskStation
emits a beep sound.
3 Run Synology Assistant and follow the installation instructions in the Quick Installation Guide that came with
your installation disc to set up the Synology DiskStation.
Important:
The data saved on the Synology DiskStation will not be erased during the reinstallation. However, for
security reason, we strongly recommend that you back up the data first.
Enable SNMP Service
Go to
Main Menu
>
Control Panel
>
SNMP
to enable SNMP service, which allows users to monitor
Synology DiskStation network flow with the network management software.
Currently,
Currently,
SNMPv1
and
SNMPv2c
protocols are supported.
To enable SNMP service:
1 Tick
Enable SNMP service
2 Enter a
Community
name.
3 Enter the optional information to help you identify your Synology DiskStation:
Name
,
Location
, and
Email
.
4 Click
Apply
.
To disable the SNMP service:
Uncheck
Enable SNMP service
, and click
Apply
.