Manualsbrain.com
  1. Handbücher
  2. Marken
  3. X-Micro
  4. WL-1502
  5. Benutzerhandbuch

X-Micro WL-1502 Benutzerhandbuch

Download
Seite von 42
 
 
USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER 
Version: 1.2 
2.  Move mouse and double-click the right button on 
Network and Dial-up 
Connections
 icon. Move mouse and double-click the 
Local Area Connection
 icon. 
The 
Local Area Connection
 window will appear. Click 
Properties
 button in the 
Local Area Connection 
window. 
3.  Check the installed list of 
Network Components
. If TCP/IP is not installed, click the 
Add
 button to install it; otherwise go to step 6. 
4.  Select 
Protocol
 in the 
Network Component Type
 dialog box and click 
Add
 button. 
5.  Select 
TCP/IP
 in 
Micro oft
 of 
Select Network Protocol
 dialog box then click OK 
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to 
complete the installation. Close and go back to 
Network
 dialog box after the TCP/IP 
installation. 
s
s
6.  Select 
TCP/IP
 and click the 
properties
 button on the 
Network
 dialog box. 
7.  Select 
Specify an IP address
 and type in values as following example. 
9  IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is 
good to connect the Wireless LAN Access Point. 
9  IP Subnet Mask: 255.255.255.0 
8.  Click OK to completes the IP parameters setting.   
 
For OS of Microsoft Windows NT:   
1.  Click the 
Start
 button and select 
Settings
, then click 
Control Panel
. The 
Control 
Panel
 window will appear. 
2.  Move mouse and double-click the right button on 
Network 
icon. The 
Network
 
window will appear. Click 
Protocol 
tab from the 
Network
 window. 
3.  Check the installed list of 
Network Protocol 
window. If TCP/IP is not installed, click 
the 
Add
 button to install it; otherwise go to step 6. 
4.  Select 
Protocol
 in the 
Network Component Type
 dialog box and click 
Add
 button. 
5.  Select 
TCP/IP
 in 
Micro oft
 of 
Select Network Protocol
 dialog box then click OK 
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to 
complete the installation. Close and go back to 
Network
 dialog box after the TCP/IP 
installation. 
6.  Select 
TCP/IP
 and click the 
properties
 button on the 
Network
 dialog box. 
7.  Select 
Specify an IP address
 and type in values as following example. 
9  IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is 
good to connect the Wireless LAN Access Point. 
9  IP Subnet Mask: 255.255.255.0 
8.  Click OK to completes the IP parameters setting.   
 
 
 
7