X-Micro IEEE 802.11b Benutzerhandbuch
USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER
Version: 2.6
5
2 Installation
2.1 Hardware Installation
Step One: Place the Wireless LAN Broadband Router to the best optimum transmission
location.
The best transmission location for your X-Micro WLAN 11b Broadband Router is
usually at the geographic center of your wireless network, with line of sign to all of
your mobile stations.
The best transmission location for your X-Micro WLAN 11b Broadband Router is
usually at the geographic center of your wireless network, with line of sign to all of
your mobile stations.
Step Two: Connect the X-Micro WLAN 11b Broadband Router to your wired network.
Connect the Ethernet WAN interface of X-Micro WLAN 11b Broadband Router by
category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable modem. A
straight-through Ethernet cable with appropriate cable length is needed.
category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable modem. A
straight-through Ethernet cable with appropriate cable length is needed.
Step Three: Supply DC power to the X-Micro WLAN 11b Broadband Router.
Use only the AC/DC power adapter supplied with the X-Micro WLAN 11b
Broadband Router; it may occur damage by using a different type of power adapter.
Broadband Router; it may occur damage by using a different type of power adapter.
The hardware installation finished.
2.2 Software Installation
¾
There are no software drivers, patches or utilities installation needed, but only the
configuration setting. Please refer to chapter 3 for software configuration.