Summit ENG. 4358-3412E Benutzerhandbuch
38
39
3
WARNING
!
Failure to reattach the buckle and harness
correctly, can result in serious injury or
death.
correctly, can result in serious injury or
death.
Thread one end of
harness down through slot
on left side of shell
harness down through slot
on left side of shell
(1)
,
across bottom of seat
(2)
and up through slot on
right side
right side
(3)
.
Thread one buckle plate
onto harness from back to
front
onto harness from back to
front
(4)
.Thread the
harness retainer
(5)
. Do
the same to the other
harness end. Make sure
the harness is not twisted.
harness end. Make sure
the harness is not twisted.
Push harness ends through
upper slots in shell
upper slots in shell
(6)
.
1
2
3
4
5
6
Fit loops on harness ends
onto the splitter plate.
onto the splitter plate.
5
Pull harness through the
back. Make sure the
harness goes OVER the
metal bar, BETWEEN
metal bar and plastic
handle of the
harness/headrest adjuster.
back. Make sure the
harness goes OVER the
metal bar, BETWEEN
metal bar and plastic
handle of the
harness/headrest adjuster.
4
Reinstall Harness
1
2
Reinstall Harness:
Fit the buckle strap down
through the slot in the
seat. Make sure buckle
faces out.
through the slot in the
seat. Make sure buckle
faces out.
WARNING:
Failure to place
buckle’s metal
plate completely
through pad and
shell can result in
serious injury or
death to the child.
buckle’s metal
plate completely
through pad and
shell can result in
serious injury or
death to the child.
!
With seat reclined all the
way back, reach under seat
between base and shell and
pull buckle clip through pad
and shell. Make sure buckle
clip is flush against bottom
of shell.
way back, reach under seat
between base and shell and
pull buckle clip through pad
and shell. Make sure buckle
clip is flush against bottom
of shell.
4358-3412E Summit 3/2/07 2:55 PM Page 41