Sterling Saw A0544325 Benutzerhandbuch

Every three months, grease all fan motors and pump motors that do not have permanently sealed
bearings. Remove grease relief plug (motors only) before adding grease. Failure to do so may
result in dislodging the bearing grease retainer, eventually causing bearing failure.

Compressors are hermetically sealed; no oiling is required.

Dirty condenser heat exchange surfaces reduce system capacity.

Brush or vacuum light dirt accumulations. Avoid bending or damaging the fins. Heavy soil
accumulations on the coil require professional steam cleaning; washing from the outside only
makes matters worse.

Figure 14

Typical SMC Subpanel

Block

Distribution

Control Voltage

Transformer

Grounding

Lug

Pump

Contactor

Condenser

Contactor

Terminal

Blocks