Socket Mobile 7 Benutzerhandbuch

 

1.  Make sure the main screen of SocketScan reports that the CHS is 

enabled. Tap Configure.  

 

 

 

You can configure prefix/suffixes whether or not the CHS is 
connected to your device.   

 
2.  The Configure screen will appear. Enter any settings, as desired: 

 

 

 

•  Trigger Mode: Select Local to directly trigger the scanner whenever 

you press the trigger button. Select Remote to have the scanner 
verify a connection to your PDA before it activates the laser. 

•  Read Indicator: Select how you would like the CHS to indicate that 

data was successfully decoded and transmitted to the PDA. 

•  Auto reconnect to last device: Check to have your PDA automatically 

connect to the last CHS unit it connected to whenever you tap 
Enabled in the main screen of SocketScan. 

•  Keep PDA alive for: Select how long you would like the PDA to stay 

alive after the last scan. This feature allows you to scan data for 
several hours without touching the PDA, as long as you scan at least 
once before the time limit passes. Select System Default to keep your 
PDA alive for the amount of time set as default in the PDA’s system 
settings.  

CHAPTER 3: SETUP FOR PALM 

35