Smeg BQ6030 Gebrauchsanleitung
13
Instructions for the Installer
ADJUSTING THE PRIMARY AIR FLOWS
The operations below must be carried out for every
burner in the barbecue section:
burner in the barbecue section:
ADJUSTING THE PRIMARY AIR FLOW FOR "U"-
SHAPED BURNERS
1
SHAPED BURNERS
1
Undo the adjuster screw A of the air regulator
sleeve.
sleeve.
2
Turn the regulator sleeve B into the position for the
type of gas to be used, consulting the table below.
type of gas to be used, consulting the table below.
3
Tighten the regulator screw, making sure that the
distance X is correct (see table below).
distance X is correct (see table below).
ADJUSTING THE PRIMARY AIR FLOW FOR
"PARALLEL FLAME" BURNERS
1
"PARALLEL FLAME" BURNERS
1
Undo the adjuster screw A of the air regulator
sleeve.
sleeve.
2
Pull the regulator sleeve B out or push it in to
achieve the position for the type of gas to be used,
consulting the table below.
achieve the position for the type of gas to be used,
consulting the table below.
3
Tighten the regulator screw, making sure that the
distance X is correct (see table below).
distance X is correct (see table below).
NATURAL GAS
(N) U-shaped
burners
G30/G31 (LPG)
U-shaped
burners
NATURAL GAS (N)
Parallel flame
burners
G30/G31 (LPG)
Parallel flame
burners
X =
4 mm
8 mm
2 mm
8 mm
A
B
X
A
B
X